Chaska, MN · SW Twin Cities metro Open Mon-Fri 8a-5p Veteran-owned · Family-run · Since 1996 (612) 369-1631

Granite Restoration · Orono, MN · Est. 1996

Granite Restoration in Orono, Minnesota.

Orono wraps the north and west shores of Lake Minnetonka across a large, low-density footprint. Where Wayzata is compact and walkable, Orono is spread out: private roads, long driveways, wooded acreage and shoreline that runs for miles. Granite restoration for Orono homes. Kitchen countertops, bathroom vanities, fireplace surrounds, and stone floors. Diamond polishing followed by a fresh impregnating sealer that holds for years. Orono is large-lot and expensive, with everything from 1920s lake cottages through mid-century homes to substantial new construction. Garages here are frequently oversized, detached, heated and paired with a separate shop or boat building, because the lots have room and the households have equipment. Long private driveways are the norm rather than the exception. Lower levels are usually finished living space.

Polished natural stone countertop restored by Clear View Surface Solutions in Chaska, MN

Granite Restoration in Orono

What an install looks like in Orono.

Orono is where the largest and most varied projects on the west side of the lake come from. A single property may carry a heated four-bay garage, a detached shop, a boat building, a long private driveway and a finished lower level, and homeowners frequently scope several of those together rather than one at a time. Shoreline lots read higher for moisture and get tested before any lower-level floor is quoted. Detached shop and boat-building floors take a different kind of use than a car garage and push the tier conversation toward chemical and impact resistance rather than decorative flake.

Granite Restoration specifically in Orono

Orono kitchens carry substantial stone in houses where replacement is a serious number, which makes restoration straightforward arithmetic. Full-surface diamond polish plus fresh impregnating sealer handles dullness, etching and dead sealer. Large islands and unusual stone selections come up regularly and get assessed individually.

Neighborhoods we work in

  • Crystal Bay
  • Navarre
  • Stubbs Bay
  • Old Crystal Bay
  • Casco Point
  • Tanager Lake
30+ YR Restoring stone Granite, marble, natural stone since 1996
3 Scope tiers Spot, Full, and Periodic Maintenance
0 Subcontractors All work done in-house
A+ BBB rated Accredited since October 2005

Why DIY sprays don't fix aged granite in Orono

Why granite needs occasional restoration.

Granite is durable but not maintenance-free. The impregnating sealer that protects it from staining wears off over years of cleaning, cooking, and daily use. Once the sealer is gone, etching from acidic foods (wine, citrus, vinegar) becomes permanent, and the surface starts to look dull. Restoration fixes both: re-polish to remove the dullness, reseal to prevent it from coming back.

DIY granite spray What most homeowners try first
  • Surface gloss only, washes off in weeks
  • Doesn't address etching or scratches
  • No real sealer protection
  • Has to be re-applied every wipe-down
Professional restoration What we install
  • Diamond polish removes etches and scratches
  • Impregnating sealer that holds for years
  • Restores depth and clarity, not just shine
  • Done in a single visit, most cases

DIY sprays are not bad for in-between cleaning. They are bad as a substitute for a real restoration when the granite has actually aged.

Orono Pricing

Granite restoration pricing in Orono, MN.

Final price depends on the scope (Spot, Full, or Maintenance), the size of the surface, the type and depth of damage, and the type of granite. The ranges below are typical project totals from real Chaska-area installs. Quote is written and fixed once we have seen the surface.

Spot / single-area

Localized repair or polish

From $400 to $600
  • One stain, etch, scratch, or chip
  • Reseal the treated area
Get my number

Single countertop or vanity

Typical kitchen run or bathroom

From $400 to $900
  • Most common scope
  • Full polish + fresh sealer (edges quoted separately)
Get my number

Multiple surfaces or floors

Whole kitchen + bath, or stone floors

From $800 to $2,500+
  • Bundle pricing if booked in one visit
  • Floor jobs scale by square footage
Get my number

Damaged or chipped edges, heavy etching that needs additional polishing passes, or larger stone floor jobs add to the scope. We talk through anything significant at the in-home assessment so the price you receive is the price that holds.

The 6-step install

How we install your floor in Orono.

Same approach on every granite project. The difference between a granite that ages gracefully and one that has to be replaced is the prep behind the sealer.

  1. 1

    In-home assessment or phone estimate

    Standard path: in-home visit, surface assessment, fixed written quote on the right scope. No salesperson pressure, no follow-up call campaigns. Faster option: a ballpark over the phone. With 30+ years of restoration work behind the answer, the phone number lands close on most jobs. The final on-site quote is the price that holds, and you are under no obligation to proceed if the on-site number differs.
  2. 2

    Mask and protect surrounding surfaces

    Cabinets, walls, appliances, and floors near the work area get masked off. Granite work involves polishing slurry, so containment is part of the install.
  3. 3

    Repair localized damage

    Chips, deep scratches, and edge damage get filled and shaped before the polishing pass. On Spot-scope work, this step alone may be the whole project.
  4. 4

    Diamond polishing pass

    Variable-speed diamond polishing across the surface using progressive grit. This is the step that removes etching, restores depth, and brings back the original finish.
  5. 5

    Detail pass on visible imperfections

    Final inspection across the polished surface and a targeted detail pass on any remaining minor imperfections (light scratches, residual dull spots). Edge refinishing is an extreme process not included in the standard scope; if your edges need rework, we quote it separately at the in-home assessment.
  6. 6

    Impregnating sealer and walk-through

    Fresh impregnating sealer applied across the whole surface and worked in. Final walk-through with you on the restored granite. Care guide for the first 30 days and a recommendation for the right re-seal cadence.

Orono questions

Common questions for Orono homeowners.

Can you coat a detached shop or boat building, not just the garage?
Yes, and in Orono those are common. Shop and boat-building floors see equipment, dropped tools, fuel and solvents rather than a car twice a day, so the tier conversation shifts toward chemical and impact resistance and away from decorative flake. Larger square footage also improves the per-foot economics. Heated buildings can be installed year-round.
Our lot is on the shoreline. Will that stop us coating the lower level?
Not automatically, but it makes the moisture reading decisive rather than routine. Shoreline lots sit closer to groundwater and their slabs push more vapor, and a film coating over a slab pushing vapor lifts off eventually. High readings get a penetrating sealer that seals while letting the slab breathe. We test before quoting, not after installing.
Our driveway is a quarter mile of private road. Do you coat all of it?
Rarely, and we would say so rather than sell it. On a long private drive the sensible scope is the apron and the visible approach near the house and garage, which is where appearance and wear both concentrate. Coating the full run is usually money spent where nobody looks and the plow blade lives.
Is Orono far, going around the lake?
Sixteen miles, but twenty-six to thirty-four minutes, because the route follows Hwy 7 and County 19 around the water rather than across it. Inside the standard service area with no travel adjustment. Grouping projects on the west side of the lake helps with scheduling.
Can you really remove etching from granite?
Yes. Etching is surface damage where acidic foods or cleaners have eaten into the polished layer. Diamond polishing physically removes the damaged layer and restores the finish underneath. Most granite responds well; very deep etching may need multiple passes.
What makes the HydroShield protection better than retail granite sealers?
Retail granite sprays are oils or silicones that sit on top of the stone. They wash off in days or weeks of normal cleaning, and they don't address etching at all. HydroShield is a molecular-bond coating: it chemically anchors into the granite's surface so liquids bead up instead of soaking in, hard-water residue cannot anchor into the pores, and the stone is significantly easier to wipe clean without harsh chemical cleaners. It's a licensed, pro-only product; you cannot buy HydroShield at a hardware store or online, only through certified dealers. Clear View is a licensed HydroShield dealer, applies it as the final step of every full restoration, and backs the HydroShield application with a 10-year written warranty.
How often should I re-seal my granite?
Depends on the granite type and how heavily it's used. Most kitchen counters need a fresh sealer every 1 to 3 years. We can recommend the right cadence after seeing your specific surface.
Do I need to clear the counters before you arrive?
Yes. The work surface needs to be completely cleared, including small appliances, items behind the sink, and anything on the cooktop. We'll go over the prep at the in-home estimate so nothing's a surprise.
What about the kitchen sink area?
Granite around sinks tends to age fastest because of the constant moisture. Full restoration includes the sink-area surfaces. Granite sinks themselves can also be restored; we'll evaluate them at the estimate.
How long does a typical kitchen restoration take?
Most single-kitchen jobs are 4 to 8 hours on site. Larger projects or floors run longer. We schedule with you so the kitchen is back in service the same day or by the next morning at most.
Will the granite look different after restoration?
It should look like the granite did the day it was installed: full color depth, polished finish, clean edges. If anything, it usually reads as 'newer' than it did before. We never change the color or finish style without your direction.
Is restoration worth it vs replacement?
Almost always. A single granite countertop run typically costs $4,000 to $15,000 to replace. Restoration is a fraction of that and avoids the demo, plumbing disruption, and downtime. The conversation we have at the in-home assessment is honest: if the granite truly can't be restored, we'll tell you.
Can you restore granite that has cracks?
Hairline cracks can usually be filled and stabilized. Active cracks or structural damage are different. We'll assess honestly at the in-home visit and tell you whether restoration is the right path.
Do you offer a warranty?
Yes. Every restoration includes a written limited warranty. Full Surface restorations that finish with HydroShield are backed by a 10-year written warranty on the HydroShield sealer application; Spot Restoration warranty terms are narrower. David walks through the warranty document at the in-home estimate.

More in Orono

All the services we offer in Orono, MN.

Granite, marble, glass. All three restored by the same owner. Bundle pricing if you're scheduling multiple surface types in one visit.

Coatings in Orono

Other surfaces we work on in Orono.

Clear View runs both sides of the business out of the same shop. If you're booking a granite restoration in Orono, bundle pricing applies when we restore or coat another surface in the same visit.

Get a quote

Ready for a granite restoration install in Orono?

Tell us about your granite project in Orono. Send a photo or two if you can. We reply within one business day, usually the same day.

  • Free on-site measurement
  • 10-year written HydroShield warranty on Full Surface restorations
  • No subcontractors, no upsells
FREE QUOTE

Tell us about your granite.

Text David (fastest) Call