Small (utility area)
Up to ~300 sq ft
From
$800
to $3,400
- Most common for mechanical rooms or storage areas
- Essential tier often the right pick
Basement Floor Coating · Medina, MN · Est. 1996
Basement Floor Coating in Medina, Minnesota.
Medina spreads across a large, low-density stretch of western Hennepin County north of Lake Minnetonka, wrapped around the small commercial node at Hamel. Most of it is acreage, hobby farm and estate-lot residential rather than subdivision. Basement coating for Medina homes. We start with a moisture test, then match the system to what the slab can hold: penetrating sealer for high vapor pressure, polyurea + polyaspartic for normal-vapor slabs you want to look finished. Medina is the largest-lot city in the service area. Acreage properties dominate: estate homes on five and ten-acre parcels, hobby farms with horse facilities, and outbuildings that are often larger than the house's garage. Bridgewater, Fields of Medina and Foxberry Farms brought conventional 2000s-and-newer subdivision housing with 3-car attached garages, and the Hamel core holds a small older village stock. Heated shop and barn space is common in a way it simply is not in the suburbs.
Basement Floor Coating in Medina
What an install looks like in Medina.
Medina is estate and acreage country, and the work reflects it. A single property may carry a three or four-bay attached garage, a detached heated shop, and a barn with a concrete floor, and homeowners usually want them scoped together rather than one at a time. Those outbuilding floors are the distinctive part: bigger than any suburban garage, taking equipment, fuel and dropped tools rather than a car twice a day, which moves the tier conversation toward chemical and impact resistance and away from decorative flake. It is one of the longer drives in the service area, so grouping and larger scopes are what make it work.
Basement Floor Coating specifically in Medina
Medina lower levels are large and finished, so the finish standard is high. Moisture testing comes first as everywhere; acreage lots on higher ground generally test normal and take the film system, while parcels near Lake Independence and the wetland corridors need the reading before the system is chosen. Walkouts are common on the rolling ground.
Neighborhoods we work in
- Hamel
- Bridgewater
- Fields of Medina
- Foxberry Farms
- Medina Highlands
- Loretto Road
30+ YR
Years working concrete
Including chronic basement moisture
100%
Slabs moisture-tested
Before quoting, before installing
0
Subcontractors
David installs every job personally
A+
BBB rated
Accredited since October 2005
Why we moisture-test before quoting in Medina
Why basement floors fail (and how to avoid it).
Basement coatings fail at a much higher rate than garage coatings, and the reason is almost always the same: moisture. Without a vapor barrier under the slab, ground moisture migrates upward through the concrete and pushes against any film coating from below. Eventually that pressure wins, and the coating bubbles or lifts. The fix isn't a better coating; it's matching the system to the slab's moisture behavior.
Film coating on a vapor-prone slab
What you don't want
- Vapor pressure pushes from underneath
- Coating blisters, then peels in 12 to 36 months
- Often advertised as if moisture didn't matter
- Re-do cost is higher than the original
Matched system + moisture test
What we install
- Calcium chloride or RH test before quoting
- Breathable sealer for high-vapor slabs
- Film coating only on confirmed normal-vapor slabs
- Honest conversation if no coating is the right answer
If your basement slab is high-moisture and you want a finished look, the right path is moisture mitigation first, then coating. We'll say so if that's the case.
Medina Pricing
Basement floor coating pricing in Medina, MN.
Basement square footage tends to be larger than garages, so total project pricing scales. The moisture test result, the system tier, and the prep scope (existing paint or coating removal, crack repair) drive the final number. Quote is written and fixed.
Medium (partial basement)
~400 to 700 sq ft
From
$1,800
to $5,800
- Standard for finished playrooms and home gyms
- Tier choice depends on moisture test
Large (full basement)
800+ sq ft
From
$3,400
to $9,000+
- Full-floor finished basement installs
- Bundle pricing if combined with garage
Removing existing paint, coating, or carpet adhesive adds to prep time. If we find a moisture issue during the test, we'll either adjust the recommendation or walk you through your options before continuing.
The 6-step install
How we install your floor in Medina.
Moisture-aware prep is what separates a basement coating that lasts from one that lifts. Same checklist every job.
- 1
In-home assessment + moisture test
David visits the basement, runs a calcium chloride or RH moisture test, checks for existing coating, paint, or adhesive, then writes a fixed quote on the tier that matches what the slab can hold. - 2
Surface prep
Diamond grinding to open the concrete profile and remove any existing paint, sealer, or carpet adhesive. The prep depth depends on what's currently down; old paint takes longer than bare concrete. - 3
Crack and joint repair
Hairline cracks filled and tooled flat. Larger cracks or joint failures get addressed before the coating goes down so they don't telegraph through the finished floor. - 4
Sealer or basecoat application
Essential tier: penetrating sealer worked into the concrete. Advanced or Ultimate: full basecoat rolled and back-rolled. The chemistry depends on which tier matched the moisture test result. - 5
Decorative flake + topcoat (Ultimate tier)
On Ultimate-tier installs, decorative flake is broadcast into the wet basecoat, scraped flat after cure, and sealed under a polyaspartic topcoat. Essential tier is single-step and skips this stage. - 6
Walk-through + warranty packet
Final walk-through, written warranty document, care guide. Most basement coatings can be walked on in 24 hours; heavy furniture goes back in 72.
Medina questions
Common questions for Medina homeowners.
Can you coat a horse barn or equipment shop floor?
Yes, and around Medina those are a large share of the work. Barn and shop slabs are usually much larger than a residential garage and take a different kind of abuse, so the specification weights chemical resistance, impact durability and slip resistance rather than decorative appearance. Larger square footage also improves the per-foot pricing. Heated buildings can be installed year-round.
We have a garage, a shop and a barn. Can they be done in one visit?
Usually, and it is the sensible way to do it. Scoping them together shares the mobilization on a twenty-four-mile drive, which shows up in the quote. The three floors may not want the same specification, though: a display-quality garage, a hard-use shop and a barn are three different jobs that happen to be on one property, and the estimate treats them that way.
Medina is twenty-four miles out. Is that inside your area?
It is on the northern edge, and yes. Thirty-two to forty minutes via Hwy 7 and County 101 with no travel adjustment in the quote. Because the drive is real, larger multi-building scopes and grouped projects schedule more easily than a single small garage on its own.
Our water is a private well. Does that change the shower glass work?
It usually makes the case stronger. Private wells in western Hennepin frequently run harder than municipal supply, which means heavier mineral deposits bonding to the glass and faster re-fouling after cleaning. Restoration removes the bonded layer; the hydrophobic sealer afterward is doing more work on well water than it does on city water, and is worth more accordingly.
Can you coat any basement floor?
Most basement slabs are coatable. The question is which system. If the moisture test comes back high, a film coating isn't the right answer; a breathable sealer is. We'll tell you which before quoting either way.
What's the moisture test you run?
A calcium chloride moisture vapor emission test or an in-situ RH probe, depending on the slab. Both measure how much water vapor is moving through the concrete. The number determines which coating chemistry can bond without lifting.
What if my basement floods occasionally?
That's a moisture management question first, coating question second. A coating won't fix a flooding problem; it'll just trap water against the slab. If flooding is a known issue, address that first, then come back to us for the finished floor.
Will a coating help with cold floors?
A coating doesn't add R-value. If cold floors are the issue, look at sub-slab insulation or a floating subfloor system. The coating goes on top of whatever flooring approach you choose.
Can I install carpet or vinyl over a coated floor?
Yes, polyurea-coated floors take overlay flooring well. Many homeowners coat for moisture protection first, then install carpet or LVP on top as the finished look.
How long does a basement install take?
Most basements are 1 to 2 days. Larger spaces or heavy prep can push to 3. We schedule with you so you can plan around utility room access.
Will it smell during the install?
Polyurea and polyaspartic have low odor compared to traditional epoxy. There's still some, especially during the basecoat hour. Open windows or run exhaust fans during the install if anyone in the home is sensitive.
Do you remove existing carpet, tile, or paint?
We can. Carpet removal is straightforward; old tile or thinset is more involved. Paint and old sealer come off during the diamond grind prep. Removal scope gets added to the quote.
Do you offer a warranty?
Yes. Written limited warranty on every install, terms vary by tier. David walks through warranty details during the in-home estimate.
More in Medina
All the services we offer in Medina, MN.
Garage, basement, patio, driveway. The same owner installs them all, often in the same visit. Bundle pricing if you're coating multiple surfaces.
Restoration in Medina
Other surfaces we work on in Medina.
Clear View runs both sides of the business out of the same shop. If you're booking a basement floor coating in Medina, bundle pricing applies when we restore or coat another surface in the same visit.
Basement Floor Coating elsewhere
Basement Floor Coating in nearby cities.
Same moisture-aware approach across the service area. If you're outside {city}, here's where else we work.
- Basement Floor Coating in Chaska, MN
- Basement Floor Coating in Chanhassen, MN
- Basement Floor Coating in Eden Prairie, MN
- Basement Floor Coating in Bloomington, MN
- Basement Floor Coating in Edina, MN
- Basement Floor Coating in Minnetonka, MN
- Basement Floor Coating in Shakopee, MN
- Basement Floor Coating in Prior Lake, MN
- Basement Floor Coating in Waconia, MN
- Basement Floor Coating in Victoria, MN
- Basement Floor Coating in Plymouth, MN
- Basement Floor Coating in Excelsior, MN
- Basement Floor Coating in Minnetrista, MN
Get a quote
Ready for a basement floor coating install in Medina?
Tell us about your basement and current floor. We'll get back to schedule the in-home moisture test and quote for Medina within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells