Chaska, MN · SW Twin Cities metro Open Mon-Fri 8a-5p Veteran-owned · Family-run · Since 1996 (612) 369-1631

Glass Restoration · Bloomington, MN · Est. 1996

Glass Restoration in Bloomington, Minnesota.

Bloomington is the largest city in our service area, just south of Minneapolis. It is home to the Mall of America and MSP International Airport, and to one of the metro's deepest stocks of 1950s and 1960s suburban housing. The city splits cleanly. West Bloomington runs executive-tier, East Bloomington more affordable, and the Minnesota River bluff defines the southern edge. Glass restoration for Bloomington homes. Shower enclosures, windows, glass tabletops. Mineral-deposit removal, surface polishing if the damage has set into the glass, and a hydrophobic sealer that holds for years. East Bloomington is dense with 1950s and 1960s ramblers, split-levels, and Cape Cods; West Bloomington runs newer executive infill on larger wooded lots. Garage norms reflect the era split: 1-car and 2-car detached on the original 1950s stock, 2-car attached on 1970s+ builds, 3-car standard on West Bloomington luxury builds. Full basements are universal; walkouts appear on Minnesota River bluff lots in the southwest.

Glass Restoration in Bloomington

What an install looks like in Bloomington.

Clear View has a long history in Bloomington, and it goes well beyond residential work. David's past project list includes the Mall of America and the Metropolitan Airport Commission, covering MSP International Airport Terminals 1 and 2. On the residential side, Bloomington's split between West and East drives a real difference in project profile. West Bloomington runs premium tiers on larger executive garages; East Bloomington runs the full range, with a strong angle of 'preserve what is left' on 1950s slabs that have weathered 70+ winters. Both halves of the city share the I-494 / I-35W salt-drift problem, which makes a real polyurea coating a different category of investment than a quick epoxy job.

Glass Restoration specifically in Bloomington

Bloomington shower glass restoration is high-volume given the size of the city (89,000+ residents) and the I-494 commuter-corridor demographic. Mineral spotting in custom showers across both West and East Bloomington is consistent; hydrophobic sealer is the differentiator that prevents the spots from coming back. Window restoration also comes up regularly for south-facing windows in West Bloomington homes.

Neighborhoods we work in

  • West Bloomington
  • East Bloomington
  • Hyland-Bush Lake
  • Penn-American
  • Oxboro
  • South Loop District
30+ YR Restoring surfaces Including glass since 1996
3 Scope tiers Spot, Full, and Periodic Maintenance
0 Subcontractors All work done in-house
A+ BBB rated Accredited since October 2005

Why replacement is almost always unnecessary in Bloomington

Why shower glass spots become permanent.

Hard water in Minnesota carries dissolved minerals (calcium, magnesium). Every time water dries on the glass, those minerals are left behind as deposits. Over time the deposits etch into the glass surface, creating a permanent rough texture that traps soap scum and looks foggy. Once the etching is set, regular cleaning won't remove it; professional restoration is needed.

Replacement The default assumption
  • Custom shower glass replacement: $2,000 to $5,000+
  • Days of demo and reinstall
  • Harsh acid-based cleaning attempts that fail and damage glass seals
  • Often unnecessary; restoration almost always works
Professional restoration + hydrophobic sealer What we install
  • Removes deposits and surface etching
  • Hydrophobic sealer prevents future spotting
  • Eco-friendly products; no harsh acids near your family or glass seals
  • Single visit, no demo or downtime, fraction of replacement cost

Replacement is rarely necessary. The exception is glass that's been chemically damaged by aggressive acid cleaners; in those cases, replacement may be the right call, and we'll tell you that at the in-home assessment.

Bloomington Pricing

Glass restoration pricing in Bloomington, MN.

Final price depends on the scope (one panel vs whole shower vs window set) and how deeply the mineral deposits have set into the glass. Ranges below are typical project totals. Quote is written and fixed once we have seen the glass in person.

Single shower panel or window

One panel or one large window

From $250 to $600
  • Most common for one-off jobs
  • Mineral removal + sealer
Get my number

Full shower enclosure

All panels of one shower

From $600 to $1,500
  • Most common scope
  • Full restoration + hydrophobic sealer
Get my number

Multi-shower or window project

Multiple showers, or full window set

From $1,400 to $3,500+
  • Whole-house or multi-bathroom projects
  • Bundle pricing if scheduled together
Get my number

Heavy mineral buildup or chemically-damaged glass takes longer. We assess the depth of the damage at the in-home visit and write a quote that holds.

The 6-step install

How we install your floor in Bloomington.

Same approach every project. The hydrophobic sealer is what separates a cleaning from a real restoration.

  1. 1

    In-home assessment and written quote

    Visit, assess the glass surfaces, determine how deeply the mineral deposits have set, and write a fixed quote on the right scope. Most assessments take 15 to 20 minutes.
  2. 2

    Mask and prepare the area

    Bathroom or window area protected against splash from the cleaning solution. Drains covered, fixtures masked, surrounding tile or trim protected.
  3. 3

    Mineral deposit removal

    Specialized cleaning solution worked into the glass to dissolve and lift mineral deposits. Multiple passes for heavy buildup. This step alone restores most glass that's been neglected for under 5 years.
  4. 4

    Surface polishing and scratch removal (if needed)

    If the deposits have etched into the glass, mechanical polishing removes the etched layer. Physical scratches from past attempts to scrub with abrasive pads can also be safely polished out, even scratches deep enough to feel with a fingernail. Clear View was the first shop in the Twin Cities to offer professional glass scratch removal, and the technique extends the life of glass that other restorers tell homeowners to replace. Not every project needs this step; we determine at the assessment whether polishing or scratch removal is required.
  5. 5

    Hydrophobic sealer application

    Hydrophobic sealer worked into the cleaned glass surface. The sealer bonds with the glass and makes water sheet off instead of beading and drying as spots. This is the step that makes the restoration last.
  6. 6

    Walk-through and care guide

    Final walk-through on the restored glass. Care guide: how to maintain the sealer (gentle squeegee after showers, mild cleaners only, never acidic). With basic maintenance, the sealer holds 2 to 4 years.

Bloomington questions

Common questions for Bloomington homeowners.

Have you really worked on the Mall of America and MSP Airport?
Yes. David's past commercial project list includes the Mall of America, the Metropolitan Airport Commission (MSP International Airport, Terminals 1 and 2), and the City of Minneapolis, alongside thousands of residential garages, basements, patios, and stone surfaces. The same owner-operated standard governs every project, residential or commercial.
My East Bloomington garage is from 1958. Is the slab still worth coating?
Most are. A 70-year-old garage slab that has not been replaced has been showing surface damage for decades; the question is whether the structure underneath is sound. We assess at the in-home estimate: diamond-grind a small test area, check the bond integrity, look for active cracking versus cosmetic. Most East Bloomington slabs respond well to a full-prep polyurea install. The ones that do not, we say so honestly and recommend replacement before coating.
How long does a typical Bloomington project take from call to install?
Bloomington travel from Chaska is around 20 to 25 minutes off-peak. In-home estimate usually within a week of your call; install scheduling typically 3 to 6 weeks during peak season (May to September), 1 to 3 weeks off-peak. We schedule the install so you can have the garage back in service within the 24 to 48 hour cure window per tier.
Do you serve all of Bloomington or just one side?
All of Bloomington: West Bloomington, East Bloomington, the Hyland-Bush Lake area, Penn-American, the South Loop, and the Minnesota River bluff neighborhoods. The travel from Chaska is the same regardless of side.
Will the glass really stop spotting after restoration?
Yes, dramatically. Hydrophobic sealer causes water to sheet off the glass instead of beading and drying. With a quick squeegee after each shower, the glass stays clear for years. Without the sealer, mineral spots return within months in Minnesota water.
How long does the sealer last?
Typically 2 to 4 years on shower glass, longer on less-used windows. Reapplication (the Periodic Maintenance scope) keeps the protection going indefinitely.
What about already-replaced shower glass that's spotting again?
Same fix. New glass spots just as fast as old glass without a sealer. Restoration plus the hydrophobic sealer is the right path. Replacement is rarely the answer.
Can you restore frosted or textured glass?
Frosted and textured glass takes more care because the texture itself traps deposits. Restoration is possible but the result varies by the texture pattern. We assess at the in-home visit and tell you what to expect.
Can you remove scratches from glass?
Yes, and we were the first shop in the Twin Cities to offer professional glass scratch removal. Scratches caused by abrasive pads, razor blades, or hard-water residue cleaning attempts can be safely polished back to optical clarity, including scratches deep enough to feel with a fingernail. The technique requires the right equipment and trained hands, which is why most cleaning services and even some restoration shops still tell homeowners scratched glass has to be replaced. We assess each piece at the in-home visit and tell you honestly which scratches can be removed and which cannot.
How do I clean the glass after restoration?
Squeegee after each shower, mild non-acidic cleaner once a week, microfiber for spots. Avoid: vinegar, ammonia-based glass cleaners, anything acidic. The care guide covers this in detail.
Do you restore windows?
Yes. Window restoration is the same process: mineral removal, polishing if etched, hydrophobic sealing. Most common for sun-facing windows that have built up hard-water spots from sprinklers or weather.
What about glass shower doors with metal frames?
The glass restoration is straightforward. The metal frame and tracks also tend to build up deposits; we can clean those at the same visit as part of the scope.
How long does a typical project take?
Single shower panel: 1 to 2 hours. Full shower enclosure: 2 to 4 hours. Window sets scale with the count. Same-day in nearly every case.
Do you offer a warranty?
Yes. The HydroShield sealer application is backed by a 10-year written warranty covering the hydrophobic sealer performance. Walked through at the in-home estimate.

More in Bloomington

All the services we offer in Bloomington, MN.

Glass, granite, marble. All three restored by the same owner. Bundle pricing when multiple surface types are scheduled together.

Coatings in Bloomington

Other surfaces we work on in Bloomington.

Clear View runs both sides of the business out of the same shop. If you're booking a glass restoration in Bloomington, bundle pricing applies when we restore or coat another surface in the same visit.

Get a quote

Ready for a glass restoration install in Bloomington?

Tell us about your glass project in Bloomington. Photos help. We reply within one business day.

  • Free on-site measurement
  • 10-year written HydroShield warranty
  • No subcontractors, no upsells
FREE QUOTE

Tell us about your glass.

Text David (fastest) Call