Chaska, MN · SW Twin Cities metro Open Mon-Fri 8a-5p Veteran-owned · Family-run · Since 1996 (612) 369-1631

Garage Floor Coating · Edina, MN · Est. 1996

Garage Floor Coating in Edina, Minnesota.

Edina is the metro's premium-tier first-ring suburb. Southdale Center opened here in 1956 as the nation's first enclosed mall, and the 50th and France district still anchors the north side. The Country Club District has been on the National Register of Historic Places since 1980. We coat garage floors for Edina homeowners using Valence Protective Coatings systems: polyurea + polyaspartic on the long-life tiers, full diamond-ground prep on every job, written limited warranty in your hands at completion. Edina is about 95% developed. The housing runs heavily to 1940s through 1960s ramblers, Cape Cods, Tudors and Colonials. A teardown-rebuild rate of roughly 100 homes a year keeps a steady stream of new luxury construction coming. Garage norms are 1- and 2-car detached or attached on the original stock; 3-car standard on teardown-rebuild luxury homes. Full basements are universal; walkouts are limited.

Garage Floor Coating in Edina

What an install looks like in Edina.

Edina has the most affluent residential profile of the cities we serve, and the project mix reflects it. Premium-tier installs, Ultimate and Apex, go into teardown-rebuild luxury garages. Country Club District homes from the original era have weathered 70-plus winters and earned a real restoration. Edina is also one of our most common cities for stone restoration. Granite and marble in the Country Club District and Morningside homes were finished to a high standard originally. Most of it needs polishing and a reseal rather than replacement. Premium positioning is the right call here; budget framing does not match what Edina homeowners expect from a contractor on their property.

Garage Floor Coating specifically in Edina

Edina garage installs trend toward the Ultimate and Apex tiers with neutral, lower-contrast flake blends that match the finished interior tone the homes carry. Country Club District and Morningside garages frequently need full prep on original-era slabs; teardown-rebuild luxury garages are usually clean slabs that just need the install. Premium positioning matches what Edina homeowners expect from a contractor on their property.

Neighborhoods we work in

  • Country Club District
  • Morningside
  • Indian Hills
  • Highlands
  • Braemar Hills
  • White Oaks
  • Sunny Slope
  • Countryside
30+ YR Years restoring surfaces Concrete, stone, glass since 1996
4 System tiers Essential, Advanced, Ultimate, Apex
0 Subcontractors David installs every job personally
A+ BBB rated Accredited since October 2005

Why we don't lead with epoxy in Edina

Why polyurea outlasts epoxy in a Minnesota garage.

Epoxy was the default for a long time. It's also the most common reason coatings fail in Minnesota: it yellows in sunlight, hot-tire pickup peels it off, and the freeze-thaw cycle finds every weak edge. Polyurea solves all three. It's flexible enough to ride out slab movement, UV-stable so it doesn't yellow, and bonded to the slab through diamond grinding so it doesn't lift.

Epoxy What most cheap garage coatings still use
  • Yellows in sunlight within 1 to 2 years
  • Hot-tire pickup lifts the film off the slab
  • Rigid film cracks with slab movement
  • Slow cure: 5 to 7 days before driving
  • Often applied over poor prep (acid etch instead of grinding)
Polyurea + polyaspartic What Clear View installs on the Ultimate tier
  • UV stable: the topcoat does not yellow
  • Flexible enough to handle hot tires
  • Diamond-ground bond: mechanical, not chemical
  • Walk-on 24h, drive-on 48h
  • Same flake color options as epoxy, longer life

Both systems still get installed across the Twin Cities. The price difference is real. The lifespan difference is bigger.

Edina Pricing

Garage floor coating pricing in Edina, MN.

Final price is a function of the slab (square footage, condition, joints, cracks), the tier you pick, and any prep work the concrete needs before the coating goes down. The ranges below are project totals from real installs, not per-square-foot teasers. Every quote is written and stable: the number we hand you at the estimate is the number you pay.

Small (1-car or partial)

Up to ~250 sq ft

From $800 to $3,400
  • Most common for 1-car garages, shop bays, utility rooms
  • Tier choice drives the price within this range
Get my number

Standard (2-car)

~400 to 500 sq ft

From $1,800 to $6,800
  • Most installs land here
  • Ultimate tier is the most common pick for 2-car garages
Get my number

Large (3-car or oversized)

600+ sq ft

From $3,200 to $14,400+
  • Tier and prep dictate the upper end
  • Apex tier on a 4-car floor with crack repair sits at the top of the range
Get my number

Cracks, spalling, oil-stained concrete, or moisture issues add to the prep scope. We test for moisture and assess existing damage during the estimate so nothing surprises either of us later.

The 6-step install

How we install your floor in Edina.

Same checklist on every install. The reason a 30-year-old shop stays in business is the work holding up at year ten.

  1. 1

    In-home assessment + written quote

    David visits the property, measures the slab, checks for moisture and existing damage, and writes a fixed quote on the tier that fits. No salesperson, no follow-up call campaigns, no contract pressure. The quote stays valid for 60 days.
  2. 2

    Diamond-ground prep

    Day one starts with diamond grinding the entire slab to open the concrete profile. This is where most installers cut corners; we don't. The coating bond is only as good as the prep underneath it.
  3. 3

    Crack and joint repair

    Any cracks, spalls, or joint failures get filled and tooled flat before the basecoat goes down. On older slabs this is the difference between a coating that lasts a decade and one that fails at year three.
  4. 4

    Basecoat application

    Polyurea (Ultimate tier) or industrial urethane (Advanced tier) goes down at full mil thickness, rolled and back-rolled for even coverage. This is the structural layer that bonds to the prepped concrete.
  5. 5

    Decorative flake + sealing topcoat

    On Ultimate-tier installs, full decorative flake is broadcast into the wet basecoat in your custom color blend. After cure, the excess is scraped, the floor swept, and the polyaspartic topcoat seals the system.
  6. 6

    Walk-through + warranty packet

    Final walk-through with David on the finished floor, written warranty document in your hands, care guide for the first 30 days. Walk on at 24 hours, drive on at 48.

Edina questions

Common questions for Edina homeowners.

Does the Country Club District Heritage Preservation designation affect a garage coating?
No, for interior work. The Country Club District has been a Heritage Preservation Landmark since 2003, with Heritage Preservation Board oversight on exterior visible changes. Interior garage floor coatings, basement coatings, granite restoration, and shower glass work are not affected. If you are also doing anything exterior, mention it at the in-home estimate.
Why is the Country Club District such a common Clear View project?
The Country Club District homes are 80+ years old now, originally built to a high standard, and most are still on the original concrete slab in the garage and the original granite and marble in the kitchen. That combination (long life remaining, high original quality, current surface fatigue) is exactly what restoration is for. Diamond grinding plus a polyurea basecoat on a Country Club garage slab produces a result that reads as brand-new in a space where 'brand-new' is the wrong note.
Can you match a coating to the existing finish of an Edina luxury home?
Yes. Edina luxury garages are often spec'd with neutral, lower-contrast flake blends that read as a finished interior surface rather than a workshop floor. We carry the chip samples to match what is already in the house: floor tile, wall color, lighting tone. David walks through options at the in-home estimate.
What about restoration vs replacement on Edina marble or granite?
Almost always restoration. Edina marble and granite was usually installed at a high original price point ($8,000 to $25,000+ for a single kitchen counter run), and replacement carries the same number today plus demolition, plumbing disruption, and a multi-week downtime. Restoration is a fraction of that and finishes in a single visit. Country Club District and Morningside marble in particular responds extremely well to diamond polishing.
How long will a polyurea garage floor coating last?
On the Ultimate or Apex tier, with full prep and routine cleaning, 15 to 20+ years is realistic. Most failures we see in other installs trace back to skipped prep, not the coating itself. The film is durable; the bond underneath it is what determines lifespan.
What's the install timeline?
Most 2-car garages are a 1-day install. Larger spaces, heavy crack repair, or full-color custom builds run into a second day. We schedule the install so you can walk on the floor within 24 hours of completion and drive on it within 48.
Do you actually do the work yourself?
Yes. David handles every install personally; no subcontractors, no rotating crew. If you have a question during the job, you ask David. That's the entire reason it's owner-operated.
What about hot-tire pickup?
Polyurea is flexible enough to handle hot tires without lifting. This is one of the most common epoxy failure modes; it's not a polyurea problem. Park hot tires on a polyurea floor for a decade and the film stays bonded.
Will the topcoat yellow in sunlight?
Polyaspartic is UV stable. The topcoat does not yellow or chalk. This is true for garages with windows, three-season rooms, and any installation that sees direct sun.
Do I need to clear out the garage before you start?
Yes. The floor needs to be completely empty of cars, storage, shelving contents, and tools. Permanently mounted items (water heater, furnace, support posts, wall-mounted shelving) we work around. Plan to clear the day before; it always takes longer than people expect.
What if my slab has existing cracks?
Fine hairline cracks are normal and filled during prep. Active cracks or significant spalling get evaluated during the estimate; either we repair them as part of the install (added to the quote) or, if the slab needs more substantial repair, we say so honestly before the job starts.
Do you offer a warranty?
Yes, every install includes a written limited warranty document. Specific terms vary by tier; David walks through the warranty during the in-home estimate so you know exactly what's covered before you sign.
What time of year is best for an install?
Polyurea cures in a wide temperature range, so installs run year-round in heated garages. Unheated spaces are easier April through October. We schedule installs ahead during peak season (May to September) by 3 to 6 weeks.
Is this a franchise or a local business?
Independent, locally owned, owner-operated. Clear View Surface Solutions has been a Chaska, MN business since 1996. BBB accredited A+ since October 2005. Not a national franchise.

More in Edina

All the services we offer in Edina, MN.

Whatever the slab (garage, basement, patio, driveway, pool deck), the same tier system applies and the same person installs it. Bundle pricing if you're coating multiple surfaces in one visit.

Restoration in Edina

Other surfaces we work on in Edina.

Clear View runs both sides of the business out of the same shop. If you're booking a garage floor coating in Edina, bundle pricing applies when we restore or coat another surface in the same visit.

Get a quote

Ready for a garage floor coating install in Edina?

Send four photos of your garage slab or fill out the form below. We'll text or email back a real quote for Edina within one business day.

  • Free on-site measurement
  • Written limited warranty
  • No subcontractors, no upsells
FREE QUOTE

Tell us about your garage.

Text David (fastest) Call