Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Edina, MN · Est. 1996
Pool Deck Coating in Edina, Minnesota.
Edina is the metro's premium-tier first-ring suburb. Southdale Center opened here in 1956 as the nation's first enclosed mall, and the 50th and France district still anchors the north side. The Country Club District has been on the National Register of Historic Places since 1980. Pool deck coating for Edina homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Edina is about 95% developed. The housing runs heavily to 1940s through 1960s ramblers, Cape Cods, Tudors and Colonials. A teardown-rebuild rate of roughly 100 homes a year keeps a steady stream of new luxury construction coming. Garage norms are 1- and 2-car detached or attached on the original stock; 3-car standard on teardown-rebuild luxury homes. Full basements are universal; walkouts are limited.
Pool Deck Coating in Edina
What an install looks like in Edina.
Edina has the most affluent residential profile of the cities we serve, and the project mix reflects it. Premium-tier installs, Ultimate and Apex, go into teardown-rebuild luxury garages. Country Club District homes from the original era have weathered 70-plus winters and earned a real restoration. Edina is also one of our most common cities for stone restoration. Granite and marble in the Country Club District and Morningside homes were finished to a high standard originally. Most of it needs polishing and a reseal rather than replacement. Premium positioning is the right call here; budget framing does not match what Edina homeowners expect from a contractor on their property.
Pool Deck Coating specifically in Edina
Pool deck coatings in Edina are common in Indian Hills, Highlands, and the Country Club District luxury homes. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable, cooler underfoot than bare concrete. Installs schedule May through early September.
Neighborhoods we work in
- Country Club District
- Morningside
- Indian Hills
- Highlands
- Braemar Hills
- White Oaks
- Sunny Slope
- Countryside
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Edina
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Edina Pricing
Pool deck coating pricing in Edina, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Edina.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Edina questions
Common questions for Edina homeowners.
Does the Country Club District Heritage Preservation designation affect a garage coating?
No, for interior work. The Country Club District has been a Heritage Preservation Landmark since 2003, with Heritage Preservation Board oversight on exterior visible changes. Interior garage floor coatings, basement coatings, granite restoration, and shower glass work are not affected. If you are also doing anything exterior, mention it at the in-home estimate.
Why is the Country Club District such a common Clear View project?
The Country Club District homes are 80+ years old now, originally built to a high standard, and most are still on the original concrete slab in the garage and the original granite and marble in the kitchen. That combination (long life remaining, high original quality, current surface fatigue) is exactly what restoration is for. Diamond grinding plus a polyurea basecoat on a Country Club garage slab produces a result that reads as brand-new in a space where 'brand-new' is the wrong note.
Can you match a coating to the existing finish of an Edina luxury home?
Yes. Edina luxury garages are often spec'd with neutral, lower-contrast flake blends that read as a finished interior surface rather than a workshop floor. We carry the chip samples to match what is already in the house: floor tile, wall color, lighting tone. David walks through options at the in-home estimate.
What about restoration vs replacement on Edina marble or granite?
Almost always restoration. Edina marble and granite was usually installed at a high original price point ($8,000 to $25,000+ for a single kitchen counter run), and replacement carries the same number today plus demolition, plumbing disruption, and a multi-week downtime. Restoration is a fraction of that and finishes in a single visit. Country Club District and Morningside marble in particular responds extremely well to diamond polishing.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Edina
All the services we offer in Edina, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Edina
Other surfaces we work on in Edina.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Edina, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Edina?
Tell us about your pool deck. We'll get back with quote details for Edina within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells