Small (entry patio)
Up to ~200 sq ft
From
$800
to $3,200
- Front-entry porches, small back patios
- Essential or Ultimate tier
Patio Coating · Apple Valley, MN · Est. 1996
Patio Coating in Apple Valley, Minnesota.
Apple Valley sits between Burnsville and Rosemount in Dakota County, a city of more than 56,000 built mostly along the Cedar Avenue corridor. It grew hard in the 1970s and 1980s and then again in the 2000s, which left it with two distinct generations of housing. Patio coating for Apple Valley homes. UV-stable topcoats so the color holds, flexible chemistry so freeze-thaw movement doesn't crack the film, full diamond-ground prep on every job. Two waves, twenty-five years apart. Palomino Hills, Hunters Wood and the neighborhoods around Valley Middle are 1970s and 1980s split-levels and ramblers with 2-car attached garages, on slabs now forty-plus years old. Cobblestone Lake and Regatta are 2000s construction with 3-car garages, larger footprints and full or walkout basements. There is comparatively little from the 1990s in between. A quote in Apple Valley depends almost entirely on which of those two eras the house belongs to.
Patio Coating in Apple Valley
What an install looks like in Apple Valley.
Apple Valley is a two-conversation city. In Palomino Hills or Hunters Wood the starting point is a forty-year-old slab that has taken Cedar Avenue salt and probably a coat of hardware-store epoxy that failed, so the estimate is mostly about prep scope and whether the concrete underneath is sound. In Cobblestone Lake or Regatta the slab is fifteen or twenty years old, structurally fine, and the estimate is about flake color and tier. Both are good projects; they just start from opposite ends. The restoration side follows the same split, with 1980s stone that has never been touched and 2000s granite arriving at its first real service.
Patio Coating specifically in Apple Valley
Patio slabs in the older Apple Valley neighborhoods have weathered unevenly for decades and the Apex flexible tier evens that out while bridging seasonal movement. Newer patios in Cobblestone Lake and Regatta are structurally clean and mostly want color and slip resistance. UV-stable topcoat either way, so the color does not yellow. Patios schedule March through November.
Neighborhoods we work in
- Cobblestone Lake
- Palomino Hills
- Regatta
- Hunters Wood
- Valley Middle
- Alimagnet
30+ YR
Years working outdoor concrete
Patios, pool decks, driveways
UV
Stable topcoats
No yellowing, no chalking
4
System tiers
Essential through Apex
A+
BBB rated
Accredited since October 2005
Why we don't install epoxy outdoors in Apple Valley
Why most outdoor patio coatings fail in Minnesota.
Two failure modes dominate: yellowing (epoxy under UV) and cracking (rigid film over a slab that moves with the seasons). Both are coating chemistry problems, not installation problems. Polyaspartic solves the yellowing. Flexible urethane solves the cracking. We don't install rigid epoxy on outdoor concrete, period.
Outdoor epoxy
Common but wrong for Minnesota
- Yellows within the first summer
- Rigid film cracks with freeze-thaw
- Lifts at edges where water sits
- Re-coat needed in 3 to 5 years
Polyaspartic + flexible urethane
What we install outdoors
- UV stable: no yellowing
- Flexible chemistry rides out slab movement
- Diamond-ground prep for full bond
- 10+ year lifespan realistic
If a patio quote you got somewhere else is for epoxy, ask what UV warranty comes with it. The answer tells you whether the installer is selling chemistry that fits or a system they buy by the pail.
Apple Valley Pricing
Patio coating pricing in Apple Valley, MN.
Outdoor pricing follows square footage, tier, and prep. Patios with existing stains, prior coatings, or significant cracking need more prep time. Quote is written and fixed once we've seen the slab.
Standard (back patio)
~250 to 500 sq ft
From
$1,800
to $5,800
- Most common outdoor patio install
- Ultimate tier with flake is the typical pick
Large or wrap-around
600+ sq ft
From
$3,400
to $14,400+
- Includes wrap-around or multi-level patios
- Apex tier for slabs with movement or cracking
Outdoor installs run March through November in Minnesota. We schedule peak season (May to September) 3 to 6 weeks ahead because the weather window is finite.
The 6-step install
How we install your floor in Apple Valley.
Outdoor concrete is unforgiving of cut corners. Same prep, same chemistry, same checklist every install.
- 1
In-home assessment + written quote
Visit the patio, measure, check existing condition (cracks, prior coatings, stains, edge spalling), and write a fixed quote on the tier that fits. - 2
Diamond-ground prep
Full diamond grinding to open the concrete profile. On outdoor slabs this is especially important; weathered surfaces look smooth but the coating won't bond without proper mechanical prep. - 3
Crack and joint repair
Hairline cracks filled and tooled flat. Expansion joints prepped to handle the seasonal slab movement underneath the coating. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier. Rolled and back-rolled at full thickness for even coverage. - 5
Decorative element + UV topcoat
On Ultimate tier: decorative flake broadcast, scraped flat after cure. Then polyaspartic UV-stable topcoat seals the system. This is what makes the difference outdoors. - 6
Walk-through + warranty packet
Final walk-through, written warranty, care guide for the first month. Walk on the patio at 24 hours.
Apple Valley questions
Common questions for Apple Valley homeowners.
Apple Valley is toward the edge of your map. Do you take projects there?
Yes. Twenty-four miles, roughly thirty-two to thirty-eight minutes via Hwy 13 and Cedar Avenue, on the standard service area with no travel adjustment in the quote. Like the rest of the outer ring, we try to group Apple Valley work rather than making the drive for one small scope, so scheduling near a neighboring project can open an earlier date.
What is different about a Cobblestone Lake garage versus an older Apple Valley one?
Almost everything except the finished system. A Cobblestone Lake garage from the 2000s has a sound slab with light cosmetic wear, so prep is fast and the project is mostly a color decision. A Palomino Hills garage from 1979 has forty winters of salt pitting, likely failed epoxy to grind off, and joints and pits to repair before anything goes down. Same polyurea and polyaspartic system on top, very different scope underneath, and the quote reflects that.
Does Cedar Avenue salt actually reach residential driveways?
It does along the corridor, and you can see it in the wear pattern near the garage door on the older homes. Salt does not attack sound concrete quickly, but forty years of freeze-thaw with salt in the water is what produces the pitted, dusty surface people call spalling. A coating stops that cycle by putting a chemically stable barrier between the salt and the slab.
Can you restore granite from a 1980s Apple Valley kitchen?
Usually yes, and stone that old often produces the most dramatic result because it has never been professionally restored. Diamond polishing works the surface of the stone itself rather than applying anything to it, so dullness, etching and light scratching come out. A fresh impregnating sealer then protects it going forward. We assess in person first, because we will not promise a result on a stone we have not seen.
Will the patio be slippery when wet?
Decorative flake adds texture to the surface so wet traction is comparable to bare textured concrete. For pool decks and high-slip-concern areas, we can add an aggregate to the topcoat for additional grip. Brought up during the estimate.
How does it handle Minnesota winter?
The polyaspartic UV topcoat is rated for full freeze-thaw cycling. Salt and ice melt don't damage it. Snow shovels are fine. Sharp metal blades (sleds with metal runners) can scratch the topcoat just like they would any finished surface.
What about the rest of the year? Will it fade?
No. Polyaspartic is UV stable, meaning the topcoat doesn't yellow, chalk, or fade. This is the chemistry difference vs epoxy. Color holds for the life of the coating.
Can I have a custom color?
Yes. Decorative flake comes in dozens of standard color blends, and we mix custom blends on request. Brought to your in-home estimate as samples so you can see them on the patio before committing.
What if my patio has cracks?
Hairline cracks get filled during prep. Larger active cracks get evaluated; either repaired as part of the install (Apex tier handles them best) or, if the slab needs more substantial work, we say so honestly.
How long does an outdoor install take?
Most patios are 1-day installs. Larger or multi-level patios run into a second day. Weather has to cooperate; we don't install on rainy days or below curing temperatures.
When can I put furniture back?
24 to 48 hours for furniture, depending on weight and topcoat cure. Plant pots and grills go back in 48. Heavy stone or built-in features in 72.
Can I coat a stamped or decorative patio?
Yes, but the Essential penetrating sealer is usually the right tier. A film coating covers the stamped pattern; if you want to preserve the decorative look, the sealer protects it without changing the appearance.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the in-home estimate so you know exactly what's covered.
More in Apple Valley
All the services we offer in Apple Valley, MN.
Patios pair well with driveway or pool deck coating in the same visit. Same prep, same chemistry, bundle pricing if you're doing both.
Restoration in Apple Valley
Other surfaces we work on in Apple Valley.
Clear View runs both sides of the business out of the same shop. If you're booking a patio coating in Apple Valley, bundle pricing applies when we restore or coat another surface in the same visit.
Patio Coating elsewhere
Patio Coating in nearby cities.
Same UV-stable systems across the metro. If you're outside {city}, here's where else we work.
- Patio Coating in Chaska, MN
- Patio Coating in Chanhassen, MN
- Patio Coating in Eden Prairie, MN
- Patio Coating in Bloomington, MN
- Patio Coating in Edina, MN
- Patio Coating in Minnetonka, MN
- Patio Coating in Shakopee, MN
- Patio Coating in Prior Lake, MN
- Patio Coating in Waconia, MN
- Patio Coating in Victoria, MN
- Patio Coating in Plymouth, MN
- Patio Coating in Excelsior, MN
- Patio Coating in Minnetrista, MN
Get a quote
Ready for a patio coating install in Apple Valley?
Tell us about your patio. We'll get back with quote details for Apple Valley within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells