Small (entry patio)
Up to ~200 sq ft
From
$800
to $3,200
- Front-entry porches, small back patios
- Essential or Ultimate tier
Patio Coating · St. Louis Park, MN · Est. 1996
Patio Coating in St. Louis Park, Minnesota.
St. Louis Park is a first-ring Hennepin County suburb pressed directly against Minneapolis, split by Hwy 100 and Hwy 7. It is the most urban city in the Clear View service area, and its housing reflects that: dense, older, and built long before three-car garages were a thing. Patio coating for St. Louis Park homes. UV-stable topcoats so the color holds, flexible chemistry so freeze-thaw movement doesn't crack the film, full diamond-ground prep on every job. The great majority of St. Louis Park went up between 1940 and 1960, and it is the classic postwar pattern: Cape Cods, ramblers and small two-story homes on tight lots, with 1-car and small 2-car garages, a large share of them detached. Fern Hill, Browndale and Minikahda Vista hold the earlier and larger stock. Newer condo, townhome and mixed-use development is concentrated near The West End and the light rail corridor. Garage slabs here are routinely sixty to eighty years old.
Patio Coating in St. Louis Park
What an install looks like in St. Louis Park.
St. Louis Park is dense, old and close in, which makes it a different kind of job from the outer suburbs. Garages are small, frequently detached and unheated, and the slabs have usually been through six or seven decades. The upside is that a postwar slab in decent condition takes a coating extremely well and the visual change is enormous, because the starting point is bare, dusty, sixty-year-old concrete. The other thing that shows up here is restoration volume out of proportion to garage volume: the kitchens and bathrooms in Fern Hill and Browndale have been renovated repeatedly, so there is a lot of stone and shower glass in the city that has never had professional service.
Patio Coating specifically in St. Louis Park
Patios in St. Louis Park are small, old and often shaded by mature trees, which weathers a slab unevenly and encourages surface growth. Apex flexible-tier urethane bridges the seasonal movement and the UV-stable topcoat restores even color. Assessment first on anything this age. Patios schedule March through November while ambient temperatures hold in product spec.
Neighborhoods we work in
- Fern Hill
- Browndale
- Minikahda Vista
- Texa-Tonka
- Elmwood
- Westwood Hills
30+ YR
Years working outdoor concrete
Patios, pool decks, driveways
UV
Stable topcoats
No yellowing, no chalking
4
System tiers
Essential through Apex
A+
BBB rated
Accredited since October 2005
Why we don't install epoxy outdoors in St. Louis Park
Why most outdoor patio coatings fail in Minnesota.
Two failure modes dominate: yellowing (epoxy under UV) and cracking (rigid film over a slab that moves with the seasons). Both are coating chemistry problems, not installation problems. Polyaspartic solves the yellowing. Flexible urethane solves the cracking. We don't install rigid epoxy on outdoor concrete, period.
Outdoor epoxy
Common but wrong for Minnesota
- Yellows within the first summer
- Rigid film cracks with freeze-thaw
- Lifts at edges where water sits
- Re-coat needed in 3 to 5 years
Polyaspartic + flexible urethane
What we install outdoors
- UV stable: no yellowing
- Flexible chemistry rides out slab movement
- Diamond-ground prep for full bond
- 10+ year lifespan realistic
If a patio quote you got somewhere else is for epoxy, ask what UV warranty comes with it. The answer tells you whether the installer is selling chemistry that fits or a system they buy by the pail.
St. Louis Park Pricing
Patio coating pricing in St. Louis Park, MN.
Outdoor pricing follows square footage, tier, and prep. Patios with existing stains, prior coatings, or significant cracking need more prep time. Quote is written and fixed once we've seen the slab.
Standard (back patio)
~250 to 500 sq ft
From
$1,800
to $5,800
- Most common outdoor patio install
- Ultimate tier with flake is the typical pick
Large or wrap-around
600+ sq ft
From
$3,400
to $14,400+
- Includes wrap-around or multi-level patios
- Apex tier for slabs with movement or cracking
Outdoor installs run March through November in Minnesota. We schedule peak season (May to September) 3 to 6 weeks ahead because the weather window is finite.
The 6-step install
How we install your floor in St. Louis Park.
Outdoor concrete is unforgiving of cut corners. Same prep, same chemistry, same checklist every install.
- 1
In-home assessment + written quote
Visit the patio, measure, check existing condition (cracks, prior coatings, stains, edge spalling), and write a fixed quote on the tier that fits. - 2
Diamond-ground prep
Full diamond grinding to open the concrete profile. On outdoor slabs this is especially important; weathered surfaces look smooth but the coating won't bond without proper mechanical prep. - 3
Crack and joint repair
Hairline cracks filled and tooled flat. Expansion joints prepped to handle the seasonal slab movement underneath the coating. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier. Rolled and back-rolled at full thickness for even coverage. - 5
Decorative element + UV topcoat
On Ultimate tier: decorative flake broadcast, scraped flat after cure. Then polyaspartic UV-stable topcoat seals the system. This is what makes the difference outdoors. - 6
Walk-through + warranty packet
Final walk-through, written warranty, care guide for the first month. Walk on the patio at 24 hours.
St. Louis Park questions
Common questions for St. Louis Park homeowners.
Is a 1950s St. Louis Park garage slab too old to coat?
Usually not. Age alone does not disqualify a slab; condition does. Most postwar St. Louis Park garage floors are dusty, pitted near the door and cracked through the joints, all of which are surface problems that diamond grinding and joint repair address. What rules a slab out is settlement, cracking well beyond hairline, or deep spalling. We assess in person and tell you honestly which one you have before quoting.
My garage is detached and unheated. Does that limit when you can install?
Less than you would think. Polyurea and polyaspartic cure across a wider temperature range than epoxy, which is one of the reasons Clear View uses them, so the install window is broader than it would be with a hardware-store product. Deep winter in an unheated detached garage still needs planning, and we work that out at the estimate rather than promising a date we cannot hold.
Do you work this far into the city?
Yes. St. Louis Park is nineteen miles from the Chaska shop, roughly twenty-six to thirty-four minutes via Hwy 212 and Hwy 62, and it is inside the standard service area with no travel adjustment. It is the most urban city on the regular calendar.
Can you restore a marble vanity from a 1990s renovation?
Yes, and it is common work in St. Louis Park, where the housing is old enough that most kitchens and bathrooms have been redone at least once. Marble from a 1990s renovation is now thirty years old and has usually taken years of ordinary cleaner, which etches the surface. Progressive polishing lifts the etched layer and rematches the original finish, then a fresh impregnating sealer protects it.
Will the patio be slippery when wet?
Decorative flake adds texture to the surface so wet traction is comparable to bare textured concrete. For pool decks and high-slip-concern areas, we can add an aggregate to the topcoat for additional grip. Brought up during the estimate.
How does it handle Minnesota winter?
The polyaspartic UV topcoat is rated for full freeze-thaw cycling. Salt and ice melt don't damage it. Snow shovels are fine. Sharp metal blades (sleds with metal runners) can scratch the topcoat just like they would any finished surface.
What about the rest of the year? Will it fade?
No. Polyaspartic is UV stable, meaning the topcoat doesn't yellow, chalk, or fade. This is the chemistry difference vs epoxy. Color holds for the life of the coating.
Can I have a custom color?
Yes. Decorative flake comes in dozens of standard color blends, and we mix custom blends on request. Brought to your in-home estimate as samples so you can see them on the patio before committing.
What if my patio has cracks?
Hairline cracks get filled during prep. Larger active cracks get evaluated; either repaired as part of the install (Apex tier handles them best) or, if the slab needs more substantial work, we say so honestly.
How long does an outdoor install take?
Most patios are 1-day installs. Larger or multi-level patios run into a second day. Weather has to cooperate; we don't install on rainy days or below curing temperatures.
When can I put furniture back?
24 to 48 hours for furniture, depending on weight and topcoat cure. Plant pots and grills go back in 48. Heavy stone or built-in features in 72.
Can I coat a stamped or decorative patio?
Yes, but the Essential penetrating sealer is usually the right tier. A film coating covers the stamped pattern; if you want to preserve the decorative look, the sealer protects it without changing the appearance.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the in-home estimate so you know exactly what's covered.
More in St. Louis Park
All the services we offer in St. Louis Park, MN.
Patios pair well with driveway or pool deck coating in the same visit. Same prep, same chemistry, bundle pricing if you're doing both.
Restoration in St. Louis Park
Other surfaces we work on in St. Louis Park.
Clear View runs both sides of the business out of the same shop. If you're booking a patio coating in St. Louis Park, bundle pricing applies when we restore or coat another surface in the same visit.
Patio Coating elsewhere
Patio Coating in nearby cities.
Same UV-stable systems across the metro. If you're outside {city}, here's where else we work.
- Patio Coating in Chaska, MN
- Patio Coating in Chanhassen, MN
- Patio Coating in Eden Prairie, MN
- Patio Coating in Bloomington, MN
- Patio Coating in Edina, MN
- Patio Coating in Minnetonka, MN
- Patio Coating in Shakopee, MN
- Patio Coating in Prior Lake, MN
- Patio Coating in Waconia, MN
- Patio Coating in Victoria, MN
- Patio Coating in Plymouth, MN
- Patio Coating in Excelsior, MN
- Patio Coating in Minnetrista, MN
Get a quote
Ready for a patio coating install in St. Louis Park?
Tell us about your patio. We'll get back with quote details for St. Louis Park within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells