Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Apple Valley, MN · Est. 1996
Pool Deck Coating in Apple Valley, Minnesota.
Apple Valley sits between Burnsville and Rosemount in Dakota County, a city of more than 56,000 built mostly along the Cedar Avenue corridor. It grew hard in the 1970s and 1980s and then again in the 2000s, which left it with two distinct generations of housing. Pool deck coating for Apple Valley homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Two waves, twenty-five years apart. Palomino Hills, Hunters Wood and the neighborhoods around Valley Middle are 1970s and 1980s split-levels and ramblers with 2-car attached garages, on slabs now forty-plus years old. Cobblestone Lake and Regatta are 2000s construction with 3-car garages, larger footprints and full or walkout basements. There is comparatively little from the 1990s in between. A quote in Apple Valley depends almost entirely on which of those two eras the house belongs to.
Pool Deck Coating in Apple Valley
What an install looks like in Apple Valley.
Apple Valley is a two-conversation city. In Palomino Hills or Hunters Wood the starting point is a forty-year-old slab that has taken Cedar Avenue salt and probably a coat of hardware-store epoxy that failed, so the estimate is mostly about prep scope and whether the concrete underneath is sound. In Cobblestone Lake or Regatta the slab is fifteen or twenty years old, structurally fine, and the estimate is about flake color and tier. Both are good projects; they just start from opposite ends. The restoration side follows the same split, with 1980s stone that has never been touched and 2000s granite arriving at its first real service.
Pool Deck Coating specifically in Apple Valley
Apple Valley pool decks are concentrated in the larger-lot 2000s neighborhoods, particularly around Cobblestone Lake. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable, and noticeably cooler underfoot than bare concrete in July. Installs schedule May through early September.
Neighborhoods we work in
- Cobblestone Lake
- Palomino Hills
- Regatta
- Hunters Wood
- Valley Middle
- Alimagnet
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Apple Valley
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Apple Valley Pricing
Pool deck coating pricing in Apple Valley, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Apple Valley.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Apple Valley questions
Common questions for Apple Valley homeowners.
Apple Valley is toward the edge of your map. Do you take projects there?
Yes. Twenty-four miles, roughly thirty-two to thirty-eight minutes via Hwy 13 and Cedar Avenue, on the standard service area with no travel adjustment in the quote. Like the rest of the outer ring, we try to group Apple Valley work rather than making the drive for one small scope, so scheduling near a neighboring project can open an earlier date.
What is different about a Cobblestone Lake garage versus an older Apple Valley one?
Almost everything except the finished system. A Cobblestone Lake garage from the 2000s has a sound slab with light cosmetic wear, so prep is fast and the project is mostly a color decision. A Palomino Hills garage from 1979 has forty winters of salt pitting, likely failed epoxy to grind off, and joints and pits to repair before anything goes down. Same polyurea and polyaspartic system on top, very different scope underneath, and the quote reflects that.
Does Cedar Avenue salt actually reach residential driveways?
It does along the corridor, and you can see it in the wear pattern near the garage door on the older homes. Salt does not attack sound concrete quickly, but forty years of freeze-thaw with salt in the water is what produces the pitted, dusty surface people call spalling. A coating stops that cycle by putting a chemically stable barrier between the salt and the slab.
Can you restore granite from a 1980s Apple Valley kitchen?
Usually yes, and stone that old often produces the most dramatic result because it has never been professionally restored. Diamond polishing works the surface of the stone itself rather than applying anything to it, so dullness, etching and light scratching come out. A fresh impregnating sealer then protects it going forward. We assess in person first, because we will not promise a result on a stone we have not seen.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Apple Valley
All the services we offer in Apple Valley, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Apple Valley
Other surfaces we work on in Apple Valley.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Apple Valley, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Apple Valley?
Tell us about your pool deck. We'll get back with quote details for Apple Valley within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells