Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Deephaven, MN · Est. 1996
Pool Deck Coating in Deephaven, Minnesota.
Deephaven occupies a peninsula on the south side of Lake Minnetonka, between Excelsior and Wayzata Bay. It is small, heavily wooded and almost entirely residential, with Cottagewood's tiny historic center the only commercial corner in the city. Pool deck coating for Deephaven homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Deephaven began as a summer colony and the bones of that are still visible. Cottagewood and Northome hold late-1800s and early-1900s lake homes, many converted from seasonal use, with garages added long after the house and often set apart from it. Mid-century infill fills the interior streets. A steady run of teardown rebuilds has added large modern houses with three-car garages, so the street mix is genuinely mixed rather than uniform.
Pool Deck Coating in Deephaven
What an install looks like in Deephaven.
Deephaven is a peninsula, which makes moisture the central technical fact of working here. Water on three sides means a large share of lower-level slabs sit close to groundwater, and the reading genuinely decides whether a film coating is appropriate at all. The housing is a study in contrasts on the same block: a converted 1900s summer cottage with a garage added in the 1950s, next to a 2018 rebuild with a three-car attached bay. The first needs an honest assessment of a slab nobody has records for; the second needs a color decision.
Pool Deck Coating specifically in Deephaven
Pool decks in Deephaven sit on the larger lakefront lots under heavy tree cover, which keeps them damp after rain and makes slip resistance a safety question rather than a specification. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable and cooler underfoot. Installs schedule May through early September.
Neighborhoods we work in
- Cottagewood
- Northome
- Carsons Bay
- St. Louis Bay
- Robinsons Bay
- Walden
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Deephaven
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Deephaven Pricing
Pool deck coating pricing in Deephaven, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Deephaven.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Deephaven questions
Common questions for Deephaven homeowners.
We are surrounded by water on a peninsula. Can our lower level be coated at all?
Often yes, but the system depends on the reading and in Deephaven that is not a formality. Peninsula ground means many slabs sit close to groundwater and push real vapor, and a film coating over one of those lifts off the floor eventually. High readings get a penetrating sealer that seals the concrete while letting it breathe. We test before quoting, every time, in this city particularly.
Our garage was added to a converted cottage decades ago. Is it coatable?
Usually, once we have looked at it. Garages added to Cottagewood and Northome cottages were built to the standard of whatever decade added them, sometimes on ground that has moved. We check for settlement, deep cracking and moisture first. Sound slabs coat well and the change on an old bare floor is dramatic. Slabs that have moved get an honest recommendation for concrete work before anything else.
Will a coating stop the tree staining on our driveway and patio?
It stops it reaching the concrete, which is the part that will not clean off. Under Deephaven's tree cover, tannin and sap soak into bare slabs and discolor them permanently. A coated surface is non-porous, so the same debris sits on top and rinses away. On a heavily shaded property that is often the most visible benefit of the whole project.
How long is the drive from Chaska?
Twelve miles, twenty to twenty-six minutes via Hwy 7 and County 19. Inside the standard service area with no travel adjustment in the quote. Deephaven groups naturally with Excelsior, Shorewood and Tonka Bay for scheduling.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Deephaven
All the services we offer in Deephaven, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Deephaven
Other surfaces we work on in Deephaven.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Deephaven, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Deephaven?
Tell us about your pool deck. We'll get back with quote details for Deephaven within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells