Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Plymouth, MN · Est. 1996
Pool Deck Coating in Plymouth, Minnesota.
Plymouth is a major Hennepin County suburb of more than 80,000 residents, spanning roughly 36 square miles. The housing runs from 1960s and 1970s ranchers through 1980s and 1990s executive subdivisions. New construction continues in The Reserve and Steeplechase along the western edge. Pool deck coating for Plymouth homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Plymouth has more multi-decade housing diversity than almost any city in the service area. Median construction year is roughly 1985. Bass Lake, Hollydale and Plymouth Creek hold strong 1970s and 1980s stock. Heavy 1990s executive subdivisions run through the central and western parts of the city, and new construction is active in The Reserve and Steeplechase. 2-car attached garages are standard in the older stock; 3-car standard from the late 1990s onward; 4-car bays in the luxury communities. Walkout basements are very common throughout the city given the rolling terrain.
Pool Deck Coating in Plymouth
What an install looks like in Plymouth.
Plymouth is the largest single market in the Clear View service area and has been on the regular calendar for two decades. The 80,000-resident base means consistent volume across every service. Pre-1990 ramblers and split-levels need full prep before a garage coating goes down. The 1990s and 2000s executive subdivisions are hitting the window where owners start thinking about coating the garage. New construction continues in The Reserve. And the older executive homes keep a steady restoration pipeline running: granite, marble and shower glass in the kitchens and bathrooms. Plymouth is the city where Clear View has installed the widest variety of projects because the housing diversity is the widest.
Pool Deck Coating specifically in Plymouth
Pool decks in Plymouth are common in The Reserve, Steeplechase, and the lake-adjacent executive subdivisions near Medicine Lake and Parkers Lake. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable, cooler underfoot than bare concrete in July. Installs schedule May through early September.
Neighborhoods we work in
- Bass Lake
- Hollydale
- Plymouth Creek
- Wood Creek
- Kingsview Heights
- Heritage Estates
- The Reserve
- Steeplechase
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Plymouth
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Plymouth Pricing
Pool deck coating pricing in Plymouth, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Plymouth.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Plymouth questions
Common questions for Plymouth homeowners.
Is Plymouth far enough from Chaska that the drive affects pricing?
No. Plymouth is on the standard service area pricing. The drive is 24 miles, about 32 to 38 minutes via Hwy 212 and I-494. We schedule Plymouth projects on the same calendar as the rest of the SW Twin Cities metro and the geographic stretch does not change the quote.
Are 1970s Plymouth garage slabs worth coating, or should they be replaced?
Almost always worth coating. Most 1970s and 1980s Plymouth garage slabs are sound under the surface; the wear pattern is hot-tire pickup from old epoxy, salt pitting from 40-plus winters of I-494 commuter drift, hairline cracks, and surface dusting. Diamond grinding plus a polyurea basecoat addresses all of it. If a slab truly has structural issues (deep cracks beyond hairline, settlement, severe spalling), we tell you honestly at the in-home assessment and recommend the right concrete contractor before coating.
Can you handle Plymouth's busier commuter-corridor salt damage?
Yes. The corridor between Hwy 169, I-494, and Hwy 55 generates the heaviest commuter salt drift in the service area, and the wear pattern on Plymouth garage floors reflects it. Polyurea basecoat plus polyaspartic topcoat is salt-resistant and chemically stable; the coating becomes the protective barrier the bare slab never had. Once the system is down, road salt no longer reaches the concrete.
Does Plymouth's volume mean a longer wait for scheduling?
Same as the rest of the SW metro: 3 to 6 weeks during peak season (May through September), 1 to 3 weeks during off-peak (November through March) for heated installs. Plymouth's volume does not push the wait further out; David takes on the same number of projects per week regardless of which city they cluster in.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Plymouth
All the services we offer in Plymouth, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Plymouth
Other surfaces we work on in Plymouth.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Plymouth, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Plymouth?
Tell us about your pool deck. We'll get back with quote details for Plymouth within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells