Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Elko New Market, MN · Est. 1996
Pool Deck Coating in Elko New Market, Minnesota.
Elko New Market sits at the southern edge of Scott County along I-35, formed from two adjacent small towns that merged. It is the furthest south Clear View works, and it has grown quickly as the I-35 corridor filled in. Pool deck coating for Elko New Market homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Overwhelmingly new. The great majority of the housing went up after 2000 as the I-35 corridor developed, with 3-car attached garages, full or walkout basements and covenant subdivisions as the standard. Two small historic cores survive from the original Elko and New Market towns, with older homes and detached garages, but they are a small fraction of the city. Almost nothing dates from the middle decades.
Pool Deck Coating in Elko New Market
What an install looks like in Elko New Market.
Elko New Market is the southern edge of the service area and the youngest housing stock in it. Almost everything here went up after 2000, which makes the work unusually uniform: thousands of 3-car attached garages arriving at the same point of wear at roughly the same time, on sound concrete needing little repair. The two original town cores are the exception and get the older-slab conversation. The drive is the longest on the list at twenty-seven miles, so grouping Elko New Market work with a Lakeville or Prior Lake project on the same run is what makes scheduling flexible.
Pool Deck Coating specifically in Elko New Market
In-ground pools in Elko New Market sit in the larger-lot covenant neighborhoods like Boulder Pointe. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable and noticeably cooler underfoot than bare concrete in July. Installs schedule May through early September.
Neighborhoods we work in
- Elko
- New Market
- Boulder Pointe
- Kensington
- Pheasant Meadows
- Main Street
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Elko New Market
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Elko New Market Pricing
Pool deck coating pricing in Elko New Market, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Elko New Market.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Elko New Market questions
Common questions for Elko New Market homeowners.
Elko New Market is a long way from Chaska. Do you take work there?
Yes, and it is honest to say it is the furthest we go. Twenty-seven miles, thirty-three to forty minutes via Hwy 13 and I-35, inside the standard service area with no travel adjustment in the quote. Because the drive is real, we group work down here when we can, so mentioning a neighbor considering the same project can open an earlier date for both.
Our house is a 2015 build. Is the garage floor old enough to coat?
Old enough, and arguably at the ideal moment. A ten-year-old slab has picked up hot-tire marks and some dusting but nothing structural, so prep is fast and the finished surface is as good as the system produces. Coating before another decade of salt and freeze-thaw means the concrete never takes that damage at all.
Do the covenant subdivisions need HOA approval for this?
Interior floor coatings are not visible from the street and generally do not trigger architectural review, including in the newer covenant neighborhoods here. Exterior work can. If your project includes the driveway, a patio or a pool deck, raise it at the in-home estimate and we will help you think through the association conversation before anything is scheduled.
Does I-35 salt reach this far south?
It does on the eastern side of the city near the corridor, and the wear pattern at the garage door line shows it. Further west the exposure drops off. Where it is real, the Apex flexible tier on a driveway puts a chemically stable barrier between the salt and the concrete and stops the freeze-thaw-with-salt cycle that produces pitting.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Elko New Market
All the services we offer in Elko New Market, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Elko New Market
Other surfaces we work on in Elko New Market.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Elko New Market, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Elko New Market?
Tell us about your pool deck. We'll get back with quote details for Elko New Market within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells