Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · St. Bonifacius, MN · Est. 1996
Pool Deck Coating in St. Bonifacius, Minnesota.
St. Bonifacius is a small city at the western end of the Lake Minnetonka area, tucked between Minnetrista and the Carver County line. It is compact, largely residential and built around a village core rather than a highway strip. Pool deck coating for St. Bonifacius homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. A small older core of early and mid-1900s homes on modest lots with detached garages added later, ringed by 1970s-through-2000s single-family construction with 2- and 3-car attached garages and full basements. Lot sizes grow toward the city edge where the housing meets Minnetrista's larger parcels. Little multi-family and no estate housing, which makes project sizes consistent and modest.
Pool Deck Coating in St. Bonifacius
What an install looks like in St. Bonifacius.
St. Bonifacius is close to the shop and easy to reach on Hwy 7, which makes it one of the more practical small cities to schedule. The housing is consistent enough that the work is predictable: 1970s-through-2000s attached garages on slabs old enough to have earned a coating and sound enough not to need much repair, plus a smaller number of older detached garages in the village core that need the concrete assessed first. Lots toward Lake Zumbra and the wetland edges get a moisture reading before any lower-level work is quoted.
Pool Deck Coating specifically in St. Bonifacius
In-ground pools appear on the larger lots toward the city edge where St. Bonifacius meets Minnetrista. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable and cooler underfoot than bare concrete in July. Installs schedule May through early September.
Neighborhoods we work in
- Downtown St. Bonifacius
- Kennedy Memorial
- Main Street
- Lake Zumbra
- Cedar Lane
- Church Hill
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in St. Bonifacius
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
St. Bonifacius Pricing
Pool deck coating pricing in St. Bonifacius, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in St. Bonifacius.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
St. Bonifacius questions
Common questions for St. Bonifacius homeowners.
How far is St. Bonifacius from your shop?
Twelve miles, eighteen to twenty-four minutes straight out Hwy 7. That is one of the shorter drives in the service area, shorter than Edina or Bloomington, and inside the standard area with no travel adjustment in the quote.
Our home is from 1988. Is the garage slab ready?
Very likely, and that vintage is the sweet spot. A slab in the thirty-to-forty-year range usually has hot-tire pickup from an old coating, some dusting and light pitting near the door, over concrete that is structurally fine. Diamond grinding takes the wear off, joints and pits get repaired, and the polyurea system goes down on sound concrete.
We back onto the wetland near Lake Zumbra. Does that matter for the basement?
It matters for which system, which is why the moisture reading comes before the quote. Lots on the wetland edge sit closer to groundwater and their slabs push more vapor; a film coating over a slab like that lifts off eventually. High readings get a penetrating sealer that seals while letting the slab breathe. Higher ground through the middle of town usually tests normal.
Small town, small job. Are you interested?
Yes. Clear View is owner-operated and takes a finite number of projects a year rather than chasing volume, so a single garage in St. Bonifacius is a normal booking. The short drive helps: twelve miles means a project here can fill a gap in the calendar that a longer trip could not.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in St. Bonifacius
All the services we offer in St. Bonifacius, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in St. Bonifacius
Other surfaces we work on in St. Bonifacius.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in St. Bonifacius, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in St. Bonifacius?
Tell us about your pool deck. We'll get back with quote details for St. Bonifacius within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells