Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Richfield, MN · Est. 1996
Pool Deck Coating in Richfield, Minnesota.
Richfield is a first-ring suburb pinned between Minneapolis, Bloomington and the airport, laid out on a tight grid across roughly seven square miles. It was built almost entirely in one burst after the Second World War and has the most uniform housing stock in the service area. Pool deck coating for Richfield homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Richfield is the classic postwar suburb: small ramblers and Cape Cods on modest lots, the overwhelming majority built between 1946 and 1958. Garages are usually 1-car or small 2-car and detached, sitting at the back of the lot off an alley or a side drive. Attached three-car garages barely exist here. A steady stream of teardown rebuilds and second-story additions has been changing individual houses for twenty years, so a brand-new build occasionally sits between two originals.
Pool Deck Coating in Richfield
What an install looks like in Richfield.
Richfield is a city of small detached garages that are all roughly the same age, which makes the work here unusually predictable and unusually prep-heavy. A seventy-year-old slab at the back of a Richfield lot has been through everything, and the honest assessment matters more than the sales pitch: some of these floors want a concrete contractor before they want a coating. Where the slab is sound, the change is dramatic, because the starting point is bare, dusty, alley-facing concrete. The teardown rebuilds are the other half of the picture, arriving with clean modern slabs and homeowners who want the garage finished before the first winter.
Pool Deck Coating specifically in Richfield
In-ground pools are rare on Richfield's postwar lot sizes, so pool deck work here is occasional. Where a pool exists, the Apex tier applies as elsewhere: slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable and cooler underfoot than bare concrete. Installs schedule May through early September.
Neighborhoods we work in
- East Richfield
- West Richfield
- Central Richfield
- Woodlake
- Assumption
- Lyndale
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Richfield
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Richfield Pricing
Pool deck coating pricing in Richfield, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Richfield.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Richfield questions
Common questions for Richfield homeowners.
My Richfield garage is detached, off the alley, and from 1952. Is it worth coating?
It depends on the concrete, and that is a real answer rather than a hedge. Seventy-year-old slabs vary enormously: some are sound under a layer of dust and surface pitting, some have settled or cracked past the point where a coating is the right spend. We assess in person before quoting. Where the slab is good, diamond grinding and a polyurea system produce one of the most dramatic results we do, because nobody has ever finished that floor.
Do you work on single-stall garages?
Yes, and in Richfield they are the norm rather than the exception. The thing a small floor changes is the economics, since setup and mobilization do not shrink with the square footage. Scheduling alongside a neighbor makes both projects more efficient, and on Richfield's tight blocks that comes up more often than you would expect.
Is Richfield within your service area? It is closer to Minneapolis than to Chaska.
It is on the eastern edge and it is inside the area. Twenty-two miles, roughly twenty-eight to thirty-six minutes via Hwy 212 and Hwy 62, with no travel adjustment in the quote. Past Richfield the answer becomes case-by-case rather than routine.
We just did a teardown rebuild. Should we coat the new garage floor now or wait?
Now, comfortably. A slab that has never seen road salt or a hot tire needs no grinding of old coating and no pit repair, so prep is minimal and the finished surface is as good as the system can produce. Coating before the first winter means the concrete never takes the damage in the first place. New-construction floors are among the least expensive projects we quote.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Richfield
All the services we offer in Richfield, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Richfield
Other surfaces we work on in Richfield.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Richfield, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Richfield?
Tell us about your pool deck. We'll get back with quote details for Richfield within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells