Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Minnetonka, MN · Est. 1996
Pool Deck Coating in Minnetonka, Minnesota.
Minnetonka sits on the eastern tip of Lake Minnetonka. The housing runs from 1950s and 1960s ramblers in Glen Lake and Minnetonka Mills up to executive subdivisions along the lake edge and the I-394 corridor. Cargill, UnitedHealth and Ridgedale Center anchor the local economy. Pool deck coating for Minnetonka homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Minnetonka is layered by era. Glen Lake and Minnetonka Mills hold 1950s and 1960s ramblers and Cape Cods. Split-levels and raised ranches with walkout basements followed in the 1960s and 1970s, then 1980s contemporaries and townhomes near the highways. Luxury teardown-rebuilds continue on the lake-edge lots. Garage norms are 2-car on the original stock, 3-car standard on 1990s+ executive builds and lake-edge homes. Walkout basements are very common given the rolling terrain.
Pool Deck Coating in Minnetonka
What an install looks like in Minnetonka.
Minnetonka is a recurring service city given its mix of established neighborhoods and lake-edge premium homes. Glen Lake and Minnetonka Mills produce a steady volume of older-garage projects where the slab is sound but the surface has weathered 50 to 60 winters. The executive subdivisions along the eastern tip of Lake Minnetonka and the I-394 corridor produce premium 3-car-plus installs at the Ultimate and Apex tiers. Most Minnetonka homeowners book the in-home estimate within a few days of calling; the city is a regular travel destination for the shop and scheduling is straightforward.
Pool Deck Coating specifically in Minnetonka
Pool deck coatings are common in lake-edge Minnetonka homes and the I-394-corridor executive subdivisions. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable. Installs schedule May through early September.
Neighborhoods we work in
- Glen Lake
- Minnetonka Mills
- West Oaks
- Sylvan Oaks
- Waternesse
- Long Lake Ridge
- Willoughby
- Glen Lake Cove
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Minnetonka
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Minnetonka Pricing
Pool deck coating pricing in Minnetonka, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Minnetonka.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Minnetonka questions
Common questions for Minnetonka homeowners.
Will lake humidity affect a Minnetonka basement coating?
It can on lake-edge lots. Walkout basements within a few hundred yards of Lake Minnetonka often show elevated residual slab moisture. We moisture-test every Minnetonka basement before scheduling and either prime with moisture-mitigation, recommend the breathable Essential penetrating sealer tier, or schedule mitigation first if the reading is too high for a film coating.
My Glen Lake garage is from 1962. Worth coating?
Usually yes. A 60-year-old garage slab has been showing surface wear for decades, but the structure is almost always still sound. Diamond grinding plus a polyurea basecoat addresses the cumulative damage. The result reads as a brand-new garage with a coating that holds for the next 15 to 20 years.
Do you do work near Ridgedale or just residential?
Most Clear View work is residential. Light commercial in the Ridgedale area (small retail spaces, restaurant kitchens, office floors) is considered case-by-case. The same tier system and process applies. Call to talk through any commercial project before assuming.
Can you coat a Minnetonka walkout basement that gets used as living space?
Yes, that is one of the more common Minnetonka project profiles. The Ultimate tier with a light-color flake blend works well for finished walkout basements being converted from carpet or vinyl to a polyurea-coated concrete surface. Moisture-test first, size the tier to the reading, and the floor reads as a finished living-area surface when it is done.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Minnetonka
All the services we offer in Minnetonka, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Minnetonka
Other surfaces we work on in Minnetonka.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Minnetonka, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Minnetonka?
Tell us about your pool deck. We'll get back with quote details for Minnetonka within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells