Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Greenwood, MN · Est. 1996
Pool Deck Coating in Greenwood, Minnesota.
Greenwood is one of the smallest cities in Minnesota, under 700 residents on a stretch of Lake Minnetonka shoreline between Excelsior and Tonka Bay. It is entirely residential: no commercial district, no through traffic, and streets that mostly end at the water. Pool deck coating for Greenwood homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. A few hundred homes, most of them expensive and most within sight of St. Albans Bay. The older stock is converted summer property with garages added later; the newer stock is teardown rebuild, generally large, with two- and three-car attached garages and finished lower levels. There is essentially no middle-market housing and no multi-family, which makes Greenwood the most uniform high-end pocket in the service area.
Pool Deck Coating in Greenwood
What an install looks like in Greenwood.
Greenwood is small enough that a single street can be most of a neighborhood, and the work reflects that: a handful of projects a year, nearly all at the higher end, nearly all within a few hundred feet of St. Albans Bay. Two things follow. Lower-level moisture is a real constraint rather than a checkbox, because shoreline ground on a small peninsula puts groundwater close to most slabs. And because volume here is thin, grouping a Greenwood project with neighboring Excelsior or Tonka Bay work is what makes scheduling flexible rather than fixed.
Pool Deck Coating specifically in Greenwood
Pool decks appear on the larger rebuilt lakefront lots. Tree cover keeps them damp after rain, so slip resistance is a practical safety matter. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable and cooler underfoot than bare concrete. Installs schedule May through early September.
Neighborhoods we work in
- St. Albans Bay
- Cottage Lane
- Greenwood Point
- Meadville
- Sunset Drive
- Bay View
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Greenwood
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Greenwood Pricing
Pool deck coating pricing in Greenwood, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Greenwood.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Greenwood questions
Common questions for Greenwood homeowners.
Greenwood is tiny. Is a single project worth the trip?
Yes, and that is not a courtesy. Clear View is owner-operated and takes a finite number of projects a year rather than chasing volume, so one Greenwood garage is a normal booking. What the small population does affect is scheduling flexibility: grouping with Excelsior or Tonka Bay work nearby can open an earlier date than a standalone trip would.
Can our lower level near St. Albans Bay take a coated floor?
The moisture reading decides. Shoreline ground puts groundwater close to most Greenwood slabs, and a slab pushing vapor will lift a film coating off the floor over time. High readings get a penetrating sealer that seals the concrete while letting it breathe. Normal readings take the film system. We test before quoting rather than after installing.
Our streets are quiet. Does less road salt mean less damage?
It usually does, and you can see it at the garage door line. Greenwood's dead-end residential streets get a fraction of the salt load a commuter corridor throws, so the pitting pattern is milder than in a first-ring suburb. Freeze-thaw still applies in full and hot-tire pickup from any old coating still happens, so slabs still wear. They just wear more gently.
Will tree debris keep staining a coated patio?
It will sit on the surface instead of soaking in, which is the whole difference. Tannin and sap penetrate bare concrete and discolor it permanently. A coated surface is non-porous, so the same debris rinses off. Under Greenwood's tree cover that is often the most visible result of the project.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Greenwood
All the services we offer in Greenwood, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Greenwood
Other surfaces we work on in Greenwood.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Greenwood, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Greenwood?
Tell us about your pool deck. We'll get back with quote details for Greenwood within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells