Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Shorewood, MN · Est. 1996
Pool Deck Coating in Shorewood, Minnesota.
Shorewood sits on the south shore of Lake Minnetonka between Excelsior and Chanhassen, with Christmas Lake on its southern edge. It is wooded, low-density and almost entirely residential, with no real commercial center of its own. Pool deck coating for Shorewood homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Shorewood is a mix of converted lake property and later suburban construction. Older cottages near Gideons Bay and Smithtown Bay were built seasonal and converted to year-round, usually with garages added afterward. The 1970s through 1990s brought conventional single-family homes on wooded lots away from the water, most with 2-car attached garages and full basements. Christmas Lake frontage carries substantially larger and newer construction with three-car bays.
Pool Deck Coating in Shorewood
What an install looks like in Shorewood.
Shorewood is close to the Chaska shop and easy to schedule, which makes it one of the more practical lake-area cities to work in. The city divides between converted lake property near the water, where garages were added later and slabs vary in vintage, and conventional 1970s-through-1990s suburban stock on the wooded interior lots, where the work is predictable. Christmas Lake frontage is the third category and brings larger newer houses. Everywhere in Shorewood, proximity to water means lower-level moisture gets a reading rather than an assumption.
Pool Deck Coating specifically in Shorewood
Pool decks in Shorewood sit on the larger wooded and lakefront lots. Tree cover keeps them damp after rain, so slip resistance is a practical safety question rather than a spec line. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable and cooler underfoot than bare concrete. Installs schedule May through early September.
Neighborhoods we work in
- Gideons Bay
- Christmas Lake
- Smithtown Bay
- Enchanted Island
- Yellowstone Trail
- Mill Street
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Shorewood
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Shorewood Pricing
Pool deck coating pricing in Shorewood, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Shorewood.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Shorewood questions
Common questions for Shorewood homeowners.
Shorewood is close to Chaska. Does that help with scheduling?
It does. Nine miles, fifteen to twenty minutes via Hwy 7 and County 19, which is among the shortest drives in the service area outside Chaska and Carver. Short drives make it easier to fit a project into a gap in the calendar, so Shorewood work sometimes slots earlier than the standard three-to-six-week peak-season wait.
We are between two lakes. Is our basement going to test wet?
Possibly, and that is exactly why we test. Ground between Lake Minnetonka and Christmas Lake holds water, and slabs near either shore push more vapor than the wooded interior does. A film coating over a slab pushing vapor lifts off eventually, so high readings get a penetrating sealer that seals while letting the slab breathe. Interior lots frequently test normal and take the film system.
Our garage was added to an old lake cottage. Is that slab any good?
Sometimes excellent, sometimes not, and there is rarely any record either way. Garages added to converted cottages were built to whatever standard applied at the time, occasionally on ground that has moved since. We check for settlement, cracking and moisture before quoting. Sound slabs coat well; slabs that have moved get an honest recommendation for concrete work first.
Tree debris stains our patio every year. Will a coating stop that?
It stops the staining from reaching the concrete, which is the part you cannot clean. Leaf tannin, sap and organic debris soak into bare concrete and discolor it permanently. A coated surface is non-porous, so the same debris sits on top and washes off. Under heavy tree cover that is often the single most visible benefit.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Shorewood
All the services we offer in Shorewood, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Shorewood
Other surfaces we work on in Shorewood.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Shorewood, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Shorewood?
Tell us about your pool deck. We'll get back with quote details for Shorewood within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells