Small (small inground or above-ground surround)
Up to ~300 sq ft
From
$1,800
to $5,800
- Above-ground pool decks and small inground surrounds
- Ultimate tier standard
Pool Deck Coating · Savage, MN · Est. 1996
Pool Deck Coating in Savage, Minnesota.
Savage sits on the south bank of the Minnesota River in Scott County, between Shakopee and Burnsville. It went from a small river town to a city of more than 30,000 in about twenty-five years, so most of what stands here was built between 1990 and 2010. Pool deck coating for Savage homes. Aggregate-textured polyaspartic topcoats for wet-surface grip, light color options to reduce heat absorption, full prep including any chlorinated-area concrete damage. Savage is one of the youngest housing stocks in the service area. The great majority of homes date from the 1990s and 2000s growth wave, with 3-car attached garages standard through most of it and walkout basements common on the sloped ground running down toward the river. A smaller pocket of pre-1990 homes sits near the original town center and along the older streets by the river. That means most Savage garage slabs are between fifteen and thirty years old, which is exactly the window where a floor is worn enough to be worth coating and sound enough to coat without repair work.
Pool Deck Coating in Savage
What an install looks like in Savage.
Savage has been on the Clear View calendar for years, and there is a finished patio restoration here in the project gallery. The city's housing profile makes it unusually predictable work: a large, uniform stock of 1990s and 2000s homes whose garage slabs are all arriving at the same point of wear at roughly the same time. Three-car attached garages are the norm, walkout basements are common on the slope toward the river, and homeowners frequently coat the garage and a basement utility area on one visit to share the mobilization. The pre-1990 pocket near the old town center is the exception and gets a different conversation, because those slabs have thirty-plus winters on them.
Pool Deck Coating specifically in Savage
Savage pool decks are mostly in the larger-lot 1990s and 2000s subdivisions where in-ground pools went in with the house. Apex tier with slip-resistant aggregate broadcast, chlorine-tolerant, UV-stable, and noticeably cooler underfoot than bare concrete in July. Installs schedule May through early September.
Neighborhoods we work in
- Hidden Valley
- Prairie Ridge
- Connelly Park
- Stonebridge
- Timber Crest
- Boiling Springs
Slip
Resistant
Aggregate added to topcoat
UV
Stable
Polyaspartic topcoat
Cl
Tolerant
Chlorinated water + salt OK
A+
BBB rated
Accredited since October 2005
Why pool decks need their own spec in Savage
What makes a pool deck coating different from a patio coating.
Three things: slip resistance, heat reflectivity, and chemical exposure. A pool deck coating without all three is a patio coating in the wrong context. Aggregate in the topcoat handles grip. Light color reflects heat for barefoot comfort. UV-stable, chlorine-tolerant chemistry handles the chemical side. We don't shortcut any of the three.
Savage Pricing
Pool deck coating pricing in Savage, MN.
Pool deck pricing tracks square footage and prep complexity. Concrete near pools sometimes has settling, efflorescence from chlorinated water, or surface damage from years of pool chemicals; all that gets addressed during prep.
Standard (inground residential)
~400 to 700 sq ft
From
$3,400
to $9,000
- Most residential inground pool decks
- Ultimate with grip aggregate is the standard pick
Large or premium
800+ sq ft
From
$5,000
to $14,400+
- Large pool surrounds, outdoor entertainment areas
- Apex for older slabs with cracking
Pool deck installs schedule around the pool-open season. We can install over the spring opening window or in fall after closing; both work better than mid-summer for cure conditions.
The 6-step install
How we install your floor in Savage.
Pool deck prep is more involved than a normal patio because of the water exposure history. Same checklist, scaled to the conditions.
- 1
On-site assessment + written quote
Visit, measure the deck, evaluate existing condition including any chlorine-exposure damage, write a fixed quote. - 2
Cover the pool + protect surrounding plantings
Pool surface covered to keep prep dust and coating material out. Plantings and any features near the deck masked or covered. - 3
Diamond-ground prep + crack repair
Full surface prep, crack filling, edge repair near the pool waterline if needed. - 4
Basecoat application
Polyurea or flexible urethane basecoat depending on tier, rolled and back-rolled. - 5
Decorative flake + aggregate topcoat
Decorative flake broadcast into wet basecoat. After cure, scraped flat. Polyaspartic topcoat with grip aggregate broadcast in for slip resistance. - 6
Walk-through + cure
Final walk-through. Walkable in 24 hours, fully cured for swim use in 48.
Savage questions
Common questions for Savage homeowners.
How long is the drive from Chaska to Savage, and does it affect the price?
Fourteen miles, twenty to twenty-five minutes via Hwy 41 and Hwy 13. Savage is inside the standard service area, so the drive does not change the quote. Savage projects schedule on the same calendar as the rest of the SW metro.
My Savage house was built in 2001. Is the garage floor old enough to need coating?
That is the most common Savage project there is. A slab twenty-odd years old has usually picked up hot-tire marks, some salt pitting near the door, and general surface dusting, but the concrete underneath is almost always sound. That combination is the ideal case: enough wear to be worth doing, not enough damage to need repair first. Diamond grind, polyurea basecoat, flake, polyaspartic topcoat.
Does being close to the river affect a basement floor coating in Savage?
It affects which system we use, which is why we test rather than assume. Ground closer to the Minnesota River bottoms holds more water, and those slabs push more vapor. A slab pushing vapor will lift a film coating off the floor over time. We take a moisture reading before quoting: high readings get a penetrating sealer that lets the slab breathe, normal readings get the standard film system. Two houses a mile apart in Savage can genuinely need different answers.
Can you coat a walkout basement floor that is already finished living space?
Yes, and it is common in Savage given how many walkouts the sloped lots produced. The usual project is replacing carpet or vinyl in a finished lower level with a coated floor in a light flake blend. It cleans easier, it does not hold moisture the way carpet does, and it handles a walkout door that lets weather in. Moisture testing still comes first.
Will it actually be slip resistant when wet?
Yes. The polyaspartic topcoat is broadcast with grip aggregate (fine silica or polymer beads, depending on the texture level you want) that gives bare feet traction on a wet surface. Aggressive enough for safety, fine enough not to be uncomfortable.
Will it get hot in the sun?
Light color choices reflect significantly more heat than dark ones. We recommend lighter flake blends for pool decks specifically for this reason. Not as cool as some specialty acrylic pool deck coatings, but far cooler than dark stained concrete.
Does chlorine damage the coating?
Polyaspartic is chlorine tolerant at normal pool concentrations. Saltwater pool systems are also fine. Heavy chemical spills (concentrated shock, muriatic acid) should still be rinsed off promptly, same as you would for any finished surface.
What about the pool coping or waterline edge?
We coat the horizontal deck surface. The vertical pool coping (stone or concrete cap at the waterline) is a separate decision; we can talk through whether to include it during the estimate.
Can I coat a concrete deck with a stamped pattern?
Film coatings cover stamped patterns. If you want to keep the decorative pattern, the Essential sealer (also offered) preserves the look while adding chlorine and freeze-thaw protection.
How long does the install take?
Most residential pool decks are 1 to 2 days on site. Larger or premium decks take longer. We coordinate around the pool-use season; spring or fall installs are easier than mid-summer.
When can I open the pool after the install?
48 hours for walk and swim use. Full coating cure continues for a week beyond that, but the surface is functionally ready at 48.
Do you offer a warranty?
Yes. Written limited warranty, terms vary by tier, walked through during the estimate.
More in Savage
All the services we offer in Savage, MN.
Pool deck plus surrounding patio is a common combined install. Same prep and chemistry; we can size the visit to do both.
Restoration in Savage
Other surfaces we work on in Savage.
Clear View runs both sides of the business out of the same shop. If you're booking a pool deck coating in Savage, bundle pricing applies when we restore or coat another surface in the same visit.
Pool Deck Coating elsewhere
Pool Deck Coating in nearby cities.
Same UV + chlorine-tolerant systems across the metro. If you're outside {city}, here's where else we work.
- Pool Deck Coating in Chaska, MN
- Pool Deck Coating in Chanhassen, MN
- Pool Deck Coating in Eden Prairie, MN
- Pool Deck Coating in Bloomington, MN
- Pool Deck Coating in Edina, MN
- Pool Deck Coating in Minnetonka, MN
- Pool Deck Coating in Shakopee, MN
- Pool Deck Coating in Prior Lake, MN
- Pool Deck Coating in Waconia, MN
- Pool Deck Coating in Victoria, MN
- Pool Deck Coating in Plymouth, MN
- Pool Deck Coating in Excelsior, MN
- Pool Deck Coating in Minnetrista, MN
Get a quote
Ready for a pool deck coating install in Savage?
Tell us about your pool deck. We'll get back with quote details for Savage within one business day.
- Free on-site measurement
- Written limited warranty
- No subcontractors, no upsells